amorphorous minerals是什么意思

用法例句

Influence of annealing condition on the stress impedance of Fe-based amorphous alloy ribbons;

退火条件对铁基非晶薄带压应力阻抗效应的影响

Influence of rare earths on Fe-based amorphous composite coatings by laser cladding;

稀土RE对激光熔覆Fe基非晶复合涂层的影响

Microscopic study of formation and mechanical properties of amorphous Cu;

非晶Cu形成过程及其力学性能的微观机理研究

Amorphous Phase and Its Formation Mechanisms in Diffusion Layer of Rare Earth Aluminized Steel;

渗铝稀土钢扩散层的非晶态相及其形成机理

The quantification of amorphous phase can not be obtained by Rietveld.

说明了非晶相不能用Rietveld方法来定量的原因。

The amorphous phase is found in the outer layer of hot-dip aluminized layer.

结果发现,镀铝层的表面层存在非晶态金属相。

Study review of amorphous alloy by mechanical alloying;

非晶态合金的机械合金化研究述评

5(wt-%) amorphous alloys with high strength, low density and large Young's modulus were prepared by liquid quenching on a single roller melt-spinning apparatus.

利用单辊快速凝固装置制备出高强度、低密度、大楼量的非晶态Ａｌ６１Ｌｉ２。

The amorphous alloy s strips showd un-uniformity of silicon niobium components at the surface and uniformity in thickness.

5B9非晶带材,并对带材进行了成分和金相分析。

Highfrequency plasma and laser supported combustion wave induced by it are the main reasons for amorphous structure of ultrafine Co powder.

采用激光 -感应复合加热蒸发法 ,在不同的工艺下分别制备了非晶结构与面心立方结构的纳米钴粉 。

The SEM and TEM observation revealed that there were amorphous structures in the laser cladding.

利用５ｋＷＣＯ２激光器激光熔覆铝合金表面的Ｎｉ－Ｃｒ－Ａｌ涂层，ＳＥＭ与ＴＥＭ分析结果表明，在激光熔覆层中存在有非晶组织，非晶组织呈空间扭曲薄片或杉叶状，它们分别存在于熔覆层颗粒间白色网状组织与颗粒

The observation of SEM and TEM revealed that there are amorphous structures in the laser cladding.

利用5kWCO2激光器激光熔覆Al合金表面的Ni－Cr－Al涂层，SEM与TEM分析结果表明，在激光熔覆层中的非晶组织呈空间扭曲薄片或杉叶状，它们分别存在于熔覆层颗粒间白色网状组织与颗粒中,利用差热分析（DTA）半定量测定熔覆层中的非晶含量，功率密度，扫描速度对非晶含量有较大的影

Current study and advances on superplastic forming of bulk amorphous alloy;

大块非晶合金超塑性变形的研究现状与发展

Influence of Oxidation on the Accuracy of DSC and TG Measurements for Amorphous Alloys;

试验条件对非晶合金DSC与TG测量的影响

Study of behavior of non-isothermal crystallization of amorphous alloy Mg_(65)Cu_(22)Ni_3Y_(10);

Mg_(65)Cu_(22)Ni_3Y_(10)非晶合金的非等温晶化行为研究

The Thermo-physical Properties for the Bulk Amorphous Alloy and the Numerical Simulation during Its Cooling Process;

大块非晶合金的热物性及冷却过程的数值模拟

Optic Characteristics of Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5) Bulk Amorphous Alloy;

Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5)大块非晶的光学特性

Preparation of Bulk Amorphous Alloy with High Property in Rapidly Solidified Pow der Metallurgy;

快速凝固粉末冶金技术制备大块非晶材料

It is identified that a new bulk amorphous alloy with the largest supercooled liquid region TX of 100 K was obtaine.

用铜模铸造方法制备了不同尺寸的Zr55Al10Cu30Ni5-xPdx(x=0,1,3,5)块状非晶合金,采用X射线衍射(XRD)、扫描差热分析(DSC)和透射电镜(TEM)分别对Zr55A110Cu30Ni5-xPdx块状非晶样品的结构、热稳定性和微观组织进行了研究。

The paper was based on preparing the bulk amorphous alloy and testing it's friction and wear property in Cu-Zr-Al system, the process of preparing the bulk amorphous alloy by magnetic levitation melting - copper modle suction method was studied ,what was more, prepared the metallic ,glass matrix composites by unidirectional solidification.

本文以Cu—Zr—Al系块状非晶的制备及其摩擦磨损性能研究为背景，对磁悬浮—铜模吸铸法制备块体非晶作了研究，并用定向凝固法制备了非晶基自生复合材料。

Correlation between crystallization kinetics of amorphous alloys and primary phases during crystallization;

非晶合金的晶化动力学与初生相的内在联系

Crystallization kinetics of Ni_(59)Zr_(16)Ti_(13)Si_3Sn_2Nb_7 amorphous alloys;

Ni_(59)Zr_(16)Ti_(13)Si_3Sn_2Nb_7非晶合金的晶化动力学

5 amorphous alloys were prepared by a single roller melt-spinning technique in an air atmosphere.

5非晶合金的非等温晶化的动力学行为。