The concept of a non-equal time-interval grey model is adduced in this paper,accomplishing a tending in time order requirement,discussing the modelingmethod and equation of the non-equal time-interval grey model,providing a toolfor describing the non-equal time-interval grey process or solving some engineeringproblems.
本文提出了非等间隔灰色过程的概念，实现了对灰色模型ＧＭ在时序要求上的拓展，探讨了非等间隔灰色模型的建模方法和模型方程，为描述时间序列间隔不等的灰色过程和解决工程上的问题提供了一个新的工具。
Study on the curing process of benzoxazine-epoxy copolymerization;
苯并口恶嗪/环氧树脂共聚固化过程研究
The curing process of an epoxy-acrylics based photosensitive resin under a 514 nm Ar + laser beam and the initiation of a synergistic photo-initiator composed of a dye, a tertiary amine and an UV photo-initiator was studied.
研究了在 5 14 nm Ar+激光下丙烯酸环氧树脂在染料、叔胺、紫外引发剂协同引发下的固化过程。
The structural changes in the curing process of bismaleimide resin were studied by means of FT-IR, which indicate that the curing reaction is in two steps.
利用傅里叶变换红外光谱法研究双马来酰亚胺树脂固化过程中的结构变化,认为双马来酰亚胺树脂固化反应分两步进行:第一步是低温下的“ENE”反应;第二步是高温下的Diels-Alder反应。
The basic structure and characteristics of a new process intensification equipment named inside-circulation rotor-stator reactor were introduced,which was used to prepare the O/W emulsion.
介绍了一种新型过程强化设备——内循环定-转子反应器的基本结构及特点,并利用定-转子反应器制备油/水型乳液。
Higee technology,carried out in a rotating packed bed,is a novel technology for process intensification,which can tremendously intensify mass and heat transfer and micromixing processes.
超重力(旋转床)技术是一种能够极大强化传递和分子混合过程的突破性过程强化新技术,本文对超重力技术的基础研究,在反应与分离过程强化、纳米材料制备方面的应用研究以及工业化应用的最新进展情况进行了综述,重点介绍了本中心的研究成果。
The characteristics of solvent extraction and process intensification are introduced.
介绍了溶剂萃取和过程强化的特点,综述了国内外萃取塔设备强化研究的最新进展,并对应用最广泛的填料萃取塔、脉冲萃取塔和搅拌萃取塔强化的研究和应用情况做了较为详细的讨论。
active particles playing an important role in EB curing process;
电子束固化过程中起作用的活性粒子；
Dynamic mechanical analysis of isothermal curing of epoxy prepreg
用DMA研究环氧预浸料的等温固化过程
The Curing Process Analysis of Boron Modified Phenolic-Epoxy Resin System
硼酚醛-环氧树脂体系固化过程分析
Exploration on Boiling Phenomenon During Solidification of Epoxy Resin
环氧树脂固化过程中沸腾现象的探讨
Curing reaction of urea-formaldehyde resin by thermal mechanical analysis.
脲醛树脂固化过程的热机械性能分析
Structure and curing process of SBS/acrylates PSA cured by UV
SBS/丙烯酸酯紫外光固化压敏胶的结构与固化过程
Curing process and conductive performance of UV curable conductive inkjet printing
光固化导电喷墨油墨的固化过程和导电性能(英文)
Three-dimensional finite element simulation and prediction for process-induced deformation of thermoset composites
热固性复合材料固化过程三维有限元模拟和变形预测
IR STUDY ON THE CURING PROCESS OF AMINO ALKYD RESINS
氨基醇酸树脂固化过程的红外光谱研究
THE CURING PROCESS OF BIS(2,3-EPOXYCYCLOPENTYL) ETHER WITH AROMATIC DIAMINES
双(2,3-环氧环戊基)醚与芳香二胺的固化过程
Dust Cake Compression Research in Filter Process with Embedding Method;
固化法研究过滤过程颗粒层压缩现象
the process of changing from a gaseous to a liquid or solid state.
由气态向液态或固态变化的过程。
Houdry adiabatic dehydrogenation process
胡得利固定床绝热催化脱氢过程
Solidification Simulation and Technological Optimum of Dolly Casting
台车凝固过程的数值模拟和工艺优化
Study on the Setting Chemistry of Glass Ionomer Cement;
玻璃离子水门汀固化反应过程的研究
Magnetic Field Effect on the Process of Gas-solid Phase Photocatalysis;
气固多相光催化过程的磁场效应研究
Simulation of fluid-solid coupling during formation and evolution of high-permeability channels
大孔道形成与演化过程流固耦合模拟
Research on Evolution during Hydration Process and the Composite of CPC;
CPC水化过程液固态演化及其复合材料的研究
