Experimental research on heating temperature of hot-reclamation of used resinbonded sands;
树脂旧砂热法再生加热温度的研究
Effect of the heating temperature and heat retaining time on the inner crack healing in steel;
加热温度及保温时间对结构钢内部裂纹愈合的影响
With the increasing of heating temperature,TiO2 film formed on pure titanium surface;the oxidation weight gain increased.
结果表明,在300~1100℃,随着加热温度的升高,纯钛氧化加重,形成氧化钛膜;300~500℃,纯钛试样增重0。
Calculation of adiabatic temperature and study on knietics of preparation of amorphous boron powder by heating reduction with magnesium;
镁热还原法制备无定形硼粉绝热温度的计算与动力学研究
A programm was developed to calculate the adiabatic temperature of NiTi reaction,and the relation between adiabatic temperature and NiTi content,preheating temperature.
根据热力学原理编程计算了NiTi反应时的绝热温度及其与稀释剂w(NiTi)含量和预热温度的关系。
The adiabatic temperature(Tad) and reaction heat per unit mass in NH4VO3-TiO2-Cr2O3-Ni-Al reaction system was calculated to be 1 889.
计算知NH4VO3-TiO2-Cr2O3-Ni-Al反应体系的绝热温度(Tad)为1 889。
Effect of pyrolysis temperature on pyrolysate during fast pyrolysis of industrial lignin made by acid precipitation;
热解温度对酸沉淀工业木质素快速热解液体产物的影响
By controlling only pyrolysis temperature of Fe(CO)5, polycrystalline iron fibers with tunable structure and chemical compositions were prepared by carrier gas flow induced method.
仅通过控制Fe(CO)5的热解温度(Td),用气流诱导法制备了化学组成与结构可控的多晶铁纤维。
The change of final pyrolysis temperature,characteristic of waste,rate of gas yield and the key element of gas calorific value were studied in detail.
结果表明:实用热解设备的产气率高,理想热解温度在700℃以下。
Numerical Simulation of Slab Temperature Field During Reheating and Its Application
热轧板坯加热温度场数值模拟及应用
Study on Billet Heating Temperature of Φ35 m Rotary Hearth Furnace
Φ35m环形炉管坯加热温度的研究
Heating Temperature Measurement of Slab Rotary Furnace in BTCO
包钢环形炉管坯加热温度测试和研究
Fast heating, high precision of tempt control and high thermal efficiency.
加热速度快，控温精度高，热效率高。
Hardness was decreased after maximum by high temperature heating.
高温加热硬度达最大硬度以后保温硬度降低。
Adopted far infrared metal heating tube, fast heating and energy saving.
采用远红外线金属电热管加热、热风循环，加热速度快、温度均匀、省电。
A Study of Temperature Gradient in Liquid Phase for Double-zone Heat Directional Solidification
双区加热定向凝固液相温度梯度研究
Heating Rate and Temperature Distributing on Continuous Ohmic Heating for Liquid Food
液态食品连续通电加热的加热速率与温度分布
Fuel Heater Temperature Sensor and Element Location
燃油加热器温度感知器和元件的位置
A piece of wood is heated to a high temperature.
一块木头被加热到很高的温度。
Coal is heated to successively higher temperatures in fluidized beds.
煤在流化床中逐层加热到更高的温度。
a theory that the temperature of a body increases when kinetic energy increases.
热能量增加物体的温度即提高的理论。
Metals will melt when heated to a certain temperature.
金属加热到一定的温度都会熔化。
measures high temperatures by the resistance in a heated wire.
在加热金属线中用电阻测量温度。
An oven thermometer uses a metal strip.
加热炉用金属丝作为温度计。
First, suppose the mixture is heated to the temperature T1.
首先，假定将混合物加热到温度t1。
Time and Temperature Distribution of Ohmic Heating Thawing Beef
牛肉欧姆加热解冻的时间与温度分布
The temperature is automatically con trollable in the three-section drying oven respectively.
烘箱分三段加热，温度分别自动控制.
