Experimental study on bond behaviors between FRP tendons and concrete;
FRP筋与混凝土粘结滑移性能的试验研究
The bond strength between light-cured composite resin and exfoliated surface of base alloy;
光固化复合树脂与金属基底的瓷剥脱面间的粘结强度
Experiment research on bond behavior between deformed bar and lightweight concrete;
陶粒混凝土与变形钢筋粘结锚固性能的试验研究
The reasons and preventive measures of Tangsteel's FTSC thin slab continuous casting bonding;
唐钢FTSC工艺薄板坯连铸粘结的原因及预防措施
Microstructure and magnetostrictive property of bonding TbDyFe alloy;
粘结TbDyFe合金的组织及磁致伸缩性能
Micromorphological structures and microleakage investigation of resin bonding to deproteinized dentin;
树脂与无机改性牙本质的粘结界面及其微漏研究
Analysis on adhesion defect of silicon steel coil and countermeasures;
硅钢卷粘结成因及消除对策浅析
The linkings of the uncoiler tension,strip thickness,adhesion degree and coil radius on the wrinkles were analyzed.
为了减小带钢表面的横折印缺陷,通过建立平整机开卷过程有限元模型,研究了冷轧带钢钢卷在开卷过程中应力的大小分布及影响因素,分析了开卷张力、板厚、粘结程度和钢卷半径等与产生横折印的关系,提出了减小带钢在打开过程中的反弯和罩式炉中的粘结程度来克服带钢表面横折印缺陷的途径,并发现增大开卷张力有利于减轻或避免横折印的产生,消除了关于开卷张力与横折印关系的错误认识。
The volume fractions of the inter-cell components are calculated and the arrangement and adhesion of the single cells in the technical fibers are also described according to the feature of the cross section.
用化学方法把黄、红麻单纤维从工艺纤维中分离出来,应用计算机图像采集系统,对黄、红麻单细胞纤维的形态进行观察;描述单细胞躯干上的中腔、节点、单细胞直径及长度特征,并通过对截面的观察和截面细胞个数的统计,计算出胞间层的体积含量,推测出单细胞在工艺纤维中的粘结方式,提出黄、红麻工艺纤维细化的有效途径。
Research into Factors Affected on the Sticking Defects During the Annealing Process for Cold Rolling Strip and Countermeasures;
冷轧带钢退火粘结缺陷影响因素的研究及控制措施
Analysis on Sticking Defect of CSP Cold Rolled Steel Sheet Annealing in Bell Type Annealing Furnace;
CSP冷轧薄板罩式退火过程粘结的分析和工艺改进
Investigation in the behavior of sticking breakout and its propagation in slab continuous casting mould
结晶器内粘结漏钢及其传播行为的研究
A measured study of post-tensioning bonded prestressed concrete continuous beam;
后张有粘结预应力混凝土连续梁张拉控制参数实测研究
An investigation of structure transformation and giant magnetic-field-induced strain in bonded NiMnGaSi alloy
粘结NiMnGaSi合金的结构、相变和大磁致应变研究
The solid lubricating and wear resistant mechanisms of the bonded solid lubricant organic coatings are analyzed.
分析了有机粘结固体润滑膜的减摩耐磨主要机理,详细讨论了环氧与酚醛环氧、聚酰亚胺与聚酰胺酰亚胺、聚苯硫醚和聚酰胺等常用高分子树脂基体固体润滑膜的摩擦学特性及其性能,展望了高分子固体润滑膜的发展趋势和研究方向。
Experimental Study on Agglomeration of Fluidized Bed with Biomass Combustion;
生物质流化床燃烧粘结机理实验研究
The characterization of bed agglomeration during combustion of corn stalk pellet in a bench-scale bubbling fluidized bed with four kinds of bed material at 900℃was investigated using data from scanning electron microscopy(SEM) and energy-dispersive X-ray(EDX).
在流化床实验装置上,以河砂、白云石、粘土和石煤灰作为床料,进行了900℃下玉米秸秆成型燃料燃烧粘结机理实验研究。
The experiment results indicate the bed temperature plays an important role on the agglomeration.
在小型鼓泡流化床实验装置上,以石英砂为床料,进行了不同温度下果木枝条成型燃料流化床燃烧床料粘结机理实验研究。
Tending toward, concerning, or characteristic of agglutination.
粘结的；粘性的倾向于粘结的，关于粘结的或具有粘结特性的
The act or process of agglutinating;adhesion of distinct parts.
粘结；胶合粘结的行为或过程；独立部分的粘结
Experimental Study of Bonding Characteristics of Self-etching Adhesives;
自酸蚀粘结系统粘结性能的基础研究
Analysis of Bonding Behavior of Adhesively Jointing Structures with Cohesive Zone Model;
粘结构件粘结性能的内聚力模型分析
Microtensile bond strengths of five dentin adhesive systems
5种牙本质粘结系统粘结强度的比较
Incomplete resin infiltration at 3 self-etching adhesive-dentin interfaces
自酸蚀粘结剂牙本质粘结界面未封闭结构观察
To cause to adhere, as with glue.
粘合使粘结、使胶合，如用胶水
testing methods for flexural strength of adhesives
胶粘剂粘结挠曲强度的试验方法
no bond stretching
无粘结纲筋的后预应力
solid propellant binder
固体火箭燃料粘结剂
The fabric felted up after several washes.
衣服洗了几次粘结了。
brooch of coral (natural or agglomerated)
珊瑚（天然或粘结的）胸针
The brass plate must be adherent to the steel.
黄铜片必须和钢粘结。
A clumped mass of material formed by agglutination.
粘结团通过粘结而形成的聚集物质团块
The Syntheses and Property Studies of Dental Wet Adhesive (UB-1);
口腔用湿性粘结剂（UB-1）的研制及粘结性能检测
Experimental Investigation of the Bonded Rebar Anchorage Properties of Cement Based Inorganic Anchoring Material;
水泥基无机粘结材料植筋粘结锚固性能研究
Bonder and Optimized Investigation on Preparation Process of the Bonded NdFeB Magnets
NdFeB粘结磁体的粘结剂及制备工艺优化研究
