您的位置:汉字大全 > 行业英语 > 物理 > adherence是什么意思

adherence是什么意思

中文翻译结合力

网络释义

1)adhesion,结合力2)adhesion strength,结合力3)binding force,结合力4)cohesion,结合力5)adherence,结合力6)bonding force,结合力

用法例句

    Interfacial Adhesion of GCr15 Bearing Steel and TiN Films Grown by Plasma Immersion Ion Implantation and Deposition;

    GCr15轴承钢表面PIIID处理膜层膜基结合力的研究

    A study of adhesion of nanometer amorphous diamond film on acrylic denture resin substrates;

    纳米非晶金刚石薄膜与热凝义齿树脂材料的结合力研究

    Study on the Adhesion of Chemical Plating;

    影响刀具化学镀层结合力的因素分析

    Causes for poor adhesion strength of electroplated coating to ABS plastic and their controls

    ABS塑料与电镀层结合力差的原因分析及其控制

    The effects of depositing temperature on the thickness, adhesion strength and hardness of TiN film have been studied in this paper.

    研究了沉积温度对膜层的厚度、结合力及硬度的影响。

    Cyanide-free pre-immersion can improve covering power and throwing power as well as the adhesion strength of coating.

    无氰预浸可提高镀液深镀能力与分散能力,及镀层结合力

    To enhance the binding force between hard coating and a common structure steel substrate by ion nitriding;

    离子渗氮提高硬质膜层与普通结构钢基体结合力的研究

    The effect of different element contents of rare earth element Y on the binding force between ion plating TiN coating and substrate was studied.

    研究了不同含量稀土钇对离子镀TiN膜与基体结合力的影响。

    Influence of the sputtering methods,processing parameters and interlayer on the binding force of the films were investigated.

    试验结果表明,采用功率为200 W射频法和时间为2 h的SiC/N i-P双层薄膜结合力最好。

    Effects of annealing temperature on microstructure and cohesion of ZrW_2O_8 thin films;

    退火温度对ZrW_2O_8薄膜结构和结合力的影响

    The plating rate and cohesion of different structure coatings were measured.

    用X射线衍射分析了镀层结构;用SEM观察了各种结构镀层的表面形貌;测定了各种结构镀层的镀速和结合力;利用线性极化和阳极极化曲线分析了各种结构镀层的耐蚀性能。

    With optical microscope, friction and wear spectrometer and scratch spectrometer, the influence of the parameters of sputtering time, sputtering power and interface layer on the film was studied The results showed that the friction factor of BN film was about half of that of the steel based materials, and the cohesion between film and substrate could obviously be.

    结果表明:氮化硼薄膜的摩擦因数约为钢基材料的一半,中间层镍磷合金的加入使薄膜结合力显著提高。

    The resultant deposit had advantages such as bright, smooth, good adherence and eliminated cross corrosion.

    本文研究了铝上电镀工艺,在传统浸锌法的基础上,提出一次浸锌- 浸铁镍法和二次浸锌- 交流方波预镀暗镍法,所得镀层结合力好、平整光滑,避免了横向腐蚀,经过试验,提出了适合铝轮毂( 硅铝合金) 电镀的工艺方法。

    The rough surface offered more binding points,which could enhance the adherence between the coating and AZ91D Mg alloys,but the binding force was much more influenced by the compaction of the coating.

    结果表明,AZ91D镁合金表面活化后,虽然粗糙界面由于更多的结合点和更大的机械互锁作用,能提高镀层与基体间的结合力,但是镀层结合的致密程度对结合力的影响作用更为显著。

    The film quality and particularity of Large area glass such as pin-holes adherence quality resisting abrasion uniformity, stability of chemistry optic quality quality of heating quality of electrics and so on, are analyzed and discussed in detail as soon as possible, which relate to coating equipment desposit technics coating material structure of films and many aspects of natural science.

    在对玻璃、玻璃深加工、深加工的主要物理方法以及磁控溅射沉积方法作了简单介绍后,对玻璃镀膜膜层的主要品质和特性:针孔、结合力、耐磨性、均匀性、化学稳定性、光学性质、热学性质和电学性质展开了尽可能全面细致的分析和讨论。

    The hardness,corrosion resistance,bonding force between coating and matrix and friction coefficient of the C/Cr composite coating deposited by non-equilibrium magnetron sputtering were analyzed.

    采用非平衡磁控溅射在GW93镁合金表面制备了镀C/Cr复合镀层,分析了不同本底真空度下在GW93镁合金表面进行非平衡磁控溅射镀C/Cr复合镀层的硬度、耐蚀性、膜基结合力,摩擦系数等。

    The bonding between plating layer and base body,plating layer surface morphology were observed by SEM,and the hardness,bonding force and corro.

    介绍了工艺流程、溶液成分和工艺参数,用SEM观察了镀层与基体的结合情况、镀层表面形貌,并测试了镀层的硬度、结合力和耐腐蚀性能。

    This paper studies the effect of the inner stress of the electroless Ni-plating on cement-based composites on the bonding force of the platings with the base,as well as the main source of the bonding force,based on which excellent technology for elec- troless Ni-plating has been found out,which has laid the basis for the electroless Ni- plating on MDF cement-based composites.

    研究水泥基复合材料上化学镀镍层的内应力对镀层与基体结合力的影响以及结合力的主要来源,并通过这种研究寻找出良好的化学镀镍工艺,为 MDF 水泥基复合材料的表面化学镀镍工作打下了基础。

    carbon dioxide combining power of plasma

    血浆二氧化碳结合力

    Bond between concrete and clay

    合混凝土与钢筋间的结合力

    Adhesion Force Between Electroless Plated Ni-P/SiC Composite Coating and 45 Bearing Steel Substrate

    45钢Ni-P/SiC化学复合镀层结合力初探

    EFFECT OF PRETREATMENT ON ADHESION OF ELECTROLESS PLATED Ni-P COATINGS ON SINTERED Nd-Fe-B PERMANENT MAGNET

    前处理对烧结钕铁硼化学镀镍结合力的影响

    bond between concrete and steel

    混凝土与钢筋间的结合力

    partially prestressed composite construction

    部分预应力组合结构

    There was no legal binding or enforcement on this arrangement.

    这种结合并没有法律效力或约束力。

    The Beam-Slab-Combined Design Method for Prestressed Concrete Frame Structures;

    预应力混凝土框架结构梁板结合设计方法研究

    Analysis of Parameter Identification of Joints between Ship Mechanic Equipment;

    船舶机械结构结合面动力学参数识别的研究

    On structural type of caissons' joint cavity of gravity wharf

    关于重力式码头沉箱结合腔结构形式的探讨

    Hyperaccumulation Ability of Pronephrium Simplex to Rare Earth Elements and Corresponding REE Binding Peptides

    单叶新月蕨稀土富集能力与结合多肽结构研究

    Union is strength. Please strengthen your cooperation.

    团结就是力量,请加强你们的合作。

    Coupling devices for power line carrier systems

    GB/T7329-1998电力线载波结合设备

    3) Transfer case shift linkage binding.

    动力分导齿轮箱排挡连杆结合。

    They are combinations of politicians who are pursuing power.

    它们是追求权力的政客的结合体。

    Positive pressure and negative pressure combines together, making veneer more stable and durable.

    正负压力结合,使贴面更牢固持久。

    Rarest of all is the ability to combine reason with enthusiasm.

    结合理性与热情的能力是最难得的。

    A binding contract is thereupon concluded.

    具有拘束力的合同就此便告缔结。

Copyright © 2022-2024 汉字大全www.hanzidaquan.com All Rights Reserved 浙ICP备20019715号